FAQ
Your questions answered
Below you'll find answers to frequently asked questions. If you do not find the answer to your question, please send a message via our contact form and one of our team will reply ASAP.
What tools do I need to install the 6F water filtration system system?
All you need is a screwdriver (preferably an electric screwdriver) and a spanner/wrench.
How easy is it to install the 6F water filtration system system?
Very! If you can use a screwdriver and a spanner, you’re more than capable of installing the 6F water filtration system.
How much space do I need for the 6F water system?
The 6F water filtration system requires 122cm x 56cm (48″ x 22″) in total although the units can be spaced separately. It can be fitted to the bow of most widebeams and narrowboats. The Filter Housings are the largest component and require 86cm x 39cm (or you could position them horizontally which would require 45cm x 80cm. The UV filter and water pump can be positioned separately but it is better to place them as close to the filter housings as possible.
Where should I position the 6F water system on my boat?
The 6F water filtration system should be positioned as near to the water tank cap as possible. (usually the bow of the boat).
How much power does the 6F water system need?
The 6F system has a 240v UV Filter and a 12v water pump. This does not put a heavy load on your power supply but we recommend that you have your engine on whilst filling up the water tank to ensure you have sufficient power. (If you want to plug the water pump into a 240v socket, you will need a 12v – 240v transformer which you can get on Amazon >>> CLICK HERE FOR DETAILS
What are the ongoing costs?
Ongoing costs are nominal. We have included all the filters you need which should last you for 12-18 months (although this may vary according to usage and quality of the water). You can purchase more filters from our store (from £3/sediment filter to £11/carbon filter).
Do you offer support for installation?
Yes. Should you need support/advice, phone/whatsapp video support for installation is included.
Do you offer an installation service?
The system really is very simple to install. You don’t need to be a plumber. It only requires the ability to use a screwdriver and stick ply/hard board to the bow. Any handyperson will be more than capable of installing the sytsem. You don’t need any special DIY skills. However, if you do need help, feel free to contact us and we will do our best to find someone in your area who can help.
Can I drink the water?
We recommend you add an additional under-the-sink filter which will remove the chlorine (if you add it chlorine to your water tank) and purify the water further down to 0.5 microns. Plus, it will remineralise the water. (Please refer to our online shop or use our contact form for more information).
We write rarely, but only the best content.
